Eşyalarını Tamir Et Topluluk Mağaza

ProLine HB25 Disassembly

Giriş

This guide provides the necessary information on fully disassembling the Proline HB25 hand blender.

Neye ihtiyacın var

  1. ProLine HB25 Disassembly, ProLine HB25 Disassembly: adım 1, 1 resimden 1.

    • Unscrew the screw on the back of the product.

    Düzenle

  2. ProLine HB25 Disassembly: adım 2, 2 resimden 1. ProLine HB25 Disassembly: adım 2, 2 resimden 2.

    • Pull out the backtab of the housing.

    • Push in the snapfits with, for instance, a screwdriver.

    Düzenle

  3. ProLine HB25 Disassembly: adım 3, 2 resimden 1. ProLine HB25 Disassembly: adım 3, 2 resimden 2.

    • Separate the housing with calibrated force.

    • Keep your fingers away from the housing and do not bend or break the housing.

    • Use a flathead screwdriver to push out the lower function button.

    • Remove the separating device.

    Düzenle

  5. ProLine HB25 Disassembly: adım 4, 1 resimden 1.

    • Unscrew the hidden screw under the button.

    Düzenle

  6. ProLine HB25 Disassembly: adım 5, 2 resimden 1. ProLine HB25 Disassembly: adım 5, 2 resimden 2.

    • Open the housing.

    • Unscrew the circuit board.

    • Unscrew the wire lock.

    Düzenle

  7. ProLine HB25 Disassembly: adım 6, 2 resimden 1. ProLine HB25 Disassembly: adım 6, 2 resimden 2.

    • Push the housing of the button out of the housing.

    Düzenle

  8. ProLine HB25 Disassembly: adım 7, 2 resimden 1. ProLine HB25 Disassembly: adım 7, 2 resimden 2.

    • Push on the side of the housing of the button to push the button out of the housing.

    • The spring can jump away when you push out the button.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 7

Her zaman: 256