Eşyalarını Tamir Et Topluluk Mağaza

ProScan PLT7050 Speaker Replacement

Giriş

This is the speaker replacement guide. If the Proscan PLT 7050 tablet is producing static or no sound at all, follow these steps to replace the speaker.

Neye ihtiyacın var

  1. ProScan PLT7050 Speaker Replacement, Open Device: adım 1, 1 resimden 1.

    • Make sure device is unplugged and turned off while working on the device.

    • Remove 2 Phillips head, 4.3 mm screws from the bottom side of the tablet with a PH00 screwdriver.

    Düzenle

  2. ProScan PLT7050 Speaker Replacement: adım 2, 1 resimden 1.

    • Use the plastic opening tools to pry the back of the tablet open.

    • You may need to slide the tool along the sides of the device to get it to open. You might hear some popping noises, it is okay.

    • May be helpful if you start by the microSD slot.

    Düzenle

  4. ProScan PLT7050 Speaker Replacement, Speaker: adım 3, 1 resimden 1.

    • Remove the yellow tape.

    Düzenle

  5. ProScan PLT7050 Speaker Replacement: adım 4, 2 resimden 1. ProScan PLT7050 Speaker Replacement: adım 4, 2 resimden 2.

    • Use the soldering tool to remove the two speaker wires from the mother board.

    • Take note of where the wires are located.

    • Soldering tool will get hot.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 167