Ana içeriğe geç

Giriş

If the side guns on your drone have broken off after a hard landing, use this guide to learn how to replace them. Replacement side guns should be included in the original packaging, and no tools are required for the replacement because the screw driver is included.

  1. Identify which side gun has broken off.
    • Identify which side gun has broken off.

  2. Access the screwdriver included in the remote control.
    • Access the screwdriver included in the remote control.

  3. Flip the drone upside down.
    • Flip the drone upside down.

  4. Use the screwdriver to remove the screw holding the side gun in place. Each side gun has a corresponding screw similar to the one shown.
    • Use the screwdriver to remove the screw holding the side gun in place. Each side gun has a corresponding screw similar to the one shown.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Miranda Brinkley

Üyelik tarihi: 22-10-2018

485 İtibar

3 adet Kılavuz yazıldı

Takım

UC Davis, Team S11-G5, Lore Fall 2018 UC Davis, Team S11-G5, Lore Fall 2018 üyesi

UCD-LORE-F18S11G5

3 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 5

Her zaman: 370