Ana içeriğe geç

Qualcomm Snapdragon 800 Mobile Development Antenna Replacement

Neye ihtiyacın var

  1. Qualcomm Snapdragon 800 Mobile Development Antenna Replacement, Battery: adım 1, 2 resimden 1. Qualcomm Snapdragon 800 Mobile Development Antenna Replacement, Battery: adım 1, 2 resimden 2.
    • Locate your device.

    • Flip device onto its back.

  2. Qualcomm Snapdragon 800 Mobile Development Antenna Replacement: adım 2, 1 resimden 1.
    • Remove the tablet's back cover.

  3. Qualcomm Snapdragon 800 Mobile Development Antenna Replacement: adım 3, 1 resimden 1.
    • Locate the battery and remove it.

    • If you wish to replace the battery you can do so here.

  4. Qualcomm Snapdragon 800 Mobile Development Antenna Replacement, Back Panel: adım 4, 2 resimden 1. Qualcomm Snapdragon 800 Mobile Development Antenna Replacement, Back Panel: adım 4, 2 resimden 2.
    • Use the Phillips PH1 screwdriver to unscrew the five 4x2.5mm screws that hold the back cover.

  5. Qualcomm Snapdragon 800 Mobile Development Antenna Replacement: adım 5, 1 resimden 1.
    • Pop out the back cover.

  6. Qualcomm Snapdragon 800 Mobile Development Antenna Replacement, Antennas: adım 6, 1 resimden 1.
    • After removing the panel and the battery, your tablet should look like this.

  7. Qualcomm Snapdragon 800 Mobile Development Antenna Replacement: adım 7, 2 resimden 1. Qualcomm Snapdragon 800 Mobile Development Antenna Replacement: adım 7, 2 resimden 2.
    • Locate the tablet's antennas.

    • Remove the two 3x2.5mm screws holding them down.

  8. Qualcomm Snapdragon 800 Mobile Development Antenna Replacement: adım 8, 1 resimden 1.
    • Remove antennas and replace them as needed.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Omar

Üyelik tarihi: 09/25/17

261 İtibar

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 195