Eşyalarını Tamir Et Topluluk Mağaza

RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement

Neye ihtiyacın var

  1. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Backplate: adım 1, 3 resimden 1. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Backplate: adım 1, 3 resimden 2. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Backplate: adım 1, 3 resimden 3.

    • Remove the three Phillips #00 screws at the bottom of the device.

    Düzenle

  2. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: adım 2, 2 resimden 1. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: adım 2, 2 resimden 2.

    • Remove the two Phillips #00 screws to the left and right of the keyboard connector.

    Düzenle

  3. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: adım 3, 1 resimden 1.

    • Pull on one of the bottom corners to begin to pull off the back plate.

    Düzenle

  4. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: adım 4, 2 resimden 1. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: adım 4, 2 resimden 2.

    • Work around the outside of the chassis, using the spudger to pry the backplate off.

    • After doing this for about half the device, the backplate should pop right off.

    Düzenle

  5. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Battery: adım 5, 1 resimden 1.

    • Remove the tape over the connectors on the motherboard and other side of the battery.

    Düzenle

  7. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: adım 6, 1 resimden 1.

    • Disconnect the red and black keyboard wires connecting the battery to the motherboard.

    Düzenle

  8. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: adım 7, 1 resimden 1.

    • Disconnect the black ribbon cable running over the battery. Flip up the black clamp and pull the cable out.

    Düzenle

  9. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: adım 8, 2 resimden 1. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: adım 8, 2 resimden 2.

    • Remove the cable over the battery connecting the motherboard and the power connector.

    • Flip up the black clamp and pull the cable out.

    Düzenle

  10. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: adım 9, 2 resimden 1. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: adım 9, 2 resimden 2.

    • Pull out battery. It is taped to the device so it is safe to pull out.

    • Look for damage to the battery. If damaged, make sure to not get any acid on your fingers.

    Düzenle

  11. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Antenna: adım 10, 1 resimden 1.

    • Identify the grey wire on the right side of the device.

    Düzenle

  12. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: adım 11, 1 resimden 1.

    • Remove the orange ribbon cable over the wire.

    Düzenle

  13. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: adım 12, 1 resimden 1.

    • Remove the antenna using a soldering iron.

    Düzenle

  14. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Motherboard: adım 13, 1 resimden 1.

    • Remove the blue and black wire from the top of the motherboard.

    Düzenle

  15. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: adım 14, 1 resimden 1.

    • Remove the screws from the motherboard.

    Düzenle

  16. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: adım 15, 1 resimden 1.

    • Remove the motherboard.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Marcus Elysee

Üyelik tarihi: 10/25/19

97 İtibar

1 Kılavuz yazıldı

Rozetler: 2

Ekip

UMass Dartmouth, Team S1-G8, O'Connell Fall 2019 UMass Dartmouth, Team S1-G8, O'Connell Fall 2019 üyesi

UMASSD-O'CONNELL-F19S1G8

3 Üyeler

4 adet Kılavuz yazıldı

Bir Yorum

Where can I buy this motherboard?

waymond everett - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 2

Son 30 gün: 32

Her zaman: 1,335