RCA 8 Apollo Back Panel Replacement - iFixit Tamir Kılavuzu

Onarım Topluluğuna Katılın - Hesap Oluşturun

Giriş

Use this guide to replace the back panel on your RCA Apollo 8 tablet (identified with model number RCT6573W23).

Neye ihtiyacın var

Adım 1 Back Panel

RCA 8 Apollo Back Panel Replacement, Back Panel: adım 1, 1 resimden 1.

Before you begin, discharge your tablet battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
Power off your tablet before beginning to disassemble.

FixBot'a Sor

Adım 2

RCA 8 Apollo Back Panel Replacement: adım 2, 2 resimden 1.

RCA 8 Apollo Back Panel Replacement: adım 2, 2 resimden 2.

Insert an iFixit opening tool into the gap between the tablet and back panel.
Using a combination of iFixit opening tools and iFixit opening picks, pry the tablet upward around its perimeter to release it from the plastic rear case.
If inserted too far, an opening pick can damage your device. It is helpful to mark the edge with an opening pick, or opening tool at a depth that will not damage the inner contents of the tablet.

FixBot'a Sor

Adım 3

RCA 8 Apollo Back Panel Replacement: adım 3, 2 resimden 1.

RCA 8 Apollo Back Panel Replacement: adım 3, 2 resimden 2.

Disconnect the red and black speaker wires from the tablet.
The front and back of the tablet will be disconnected.

FixBot'a Sor

Sonuç

To reassemble your device, follow these instructions in reverse order.

İptal et: Bu kılavuzu tamamlamadım.

Yazar

3 tane daha katılımcı ile

Chantel Pfiefer

Üyelik tarihi: 04/15/24

219 İtibar

2 adet Kılavuz yazıldı

+1 tane daha rozet

Ekip

Casper College, Team 1-1, Lareau Spring 2024 Casper College, Team 1-1, Lareau Spring 2024 üyesi

CASC-LAREAU-S24S1G1

3 Üyeler

4 adet Kılavuz yazıldı

0Kılavuz Yorumları

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 4

Her zaman: 191