Eşyalarını Tamir Et Topluluk Mağaza

RCA Pro10 Edition Speaker Replacement

Giriş

This guide will serve as a step-by-step guide for speaker replacement.

Neye ihtiyacın var

  1. RCA Pro10 Edition Speaker Replacement, Speaker: adım 1, 2 resimden 1. RCA Pro10 Edition Speaker Replacement, Speaker: adım 1, 2 resimden 2.

    • Using a separating tool, look for a seam in the plastic casing that looks most accessible.

    • Use the prying tool to separate the front and back casing, working your way around the perimeter.

    • Utilize a card tool or a pick to assist in keeping the case separated.

    • To reassemble the device simply align the two casing halves and pinch to snap together or press down on the edges while the device in on a table.

    Düzenle

  3. RCA Pro10 Edition Speaker Replacement: adım 2, 1 resimden 1.

    • Flip over the back of the device while keeping it close to the front, the speaker is attached to it.

    • Remove the yellow tape securing the speaker to the back casing.

    Düzenle

  4. RCA Pro10 Edition Speaker Replacement: adım 3, 2 resimden 1. RCA Pro10 Edition Speaker Replacement: adım 3, 2 resimden 2.

    • Use the separating tool to pry the speaker from its surface.

    • Use caution when removing the speaker, you may damage the screen.

    • Cut or desolder the wires to replace or repair the speaker.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

5 tane daha katılımcı ile

Dayne Russell

Üyelik tarihi: 01/27/15

401 İtibar

4 adet Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

Pasco Hernando, Team 1-1, Prince Winter 2015 Pasco Hernando, Team 1-1, Prince Winter 2015 üyesi

PHSC-PRINCE-W15S1G1

6 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 9

Her zaman: 755