Ana içeriğe geç

Giriş

This guide may be of use if the sound no longer works properly. For speaker accessibility, the battery will have to be removed.

  1. Remove nine 4.8mm screws around the case with a JIS #00 screwdriver. Remove nine 4.8mm screws around the case with a JIS #00 screwdriver. Remove nine 4.8mm screws around the case with a JIS #00 screwdriver.
    • Remove nine 4.8mm screws around the case with a JIS #00 screwdriver.

  2. Insert plastic opening tool and slide it around the edges until the cover starts to pop off. It may be necessary to go over each side multiple times in order to pop the cover off.
    • Insert plastic opening tool and slide it around the edges until the cover starts to pop off. It may be necessary to go over each side multiple times in order to pop the cover off.

  3. Remove cover completely. Remove cover completely. Remove cover completely.
    • Remove cover completely.

  4. Disconnect battery cable from the motherboard. Disconnect battery cable from the motherboard. Disconnect battery cable from the motherboard.
    • Disconnect battery cable from the motherboard.

  5. Pull the thin black keyboard connector off and set it aside. Pull the thin black keyboard connector off and set it aside. Pull the thin black keyboard connector off and set it aside.
    • Pull the thin black keyboard connector off and set it aside.

  6. Disconnect the thick black band (bus) using a plastic opening tool or fingernail. Disconnect the thick black band (bus) using a plastic opening tool or fingernail. Disconnect the thick black band (bus) using a plastic opening tool or fingernail.
    • Disconnect the thick black band (bus) using a plastic opening tool or fingernail.

  7. Use nylon spudger tool or plastic card to separate battery from the case.
    • Use nylon spudger tool or plastic card to separate battery from the case.

  8. Carefully peel off the battery. Carefully peel off the battery. Carefully peel off the battery.
    • Carefully peel off the battery.

  9. Disconnect the speaker cord from the motherboard. Disconnect the speaker cord from the motherboard. Disconnect the speaker cord from the motherboard.
    • Disconnect the speaker cord from the motherboard.

  10. Use the plastic spudger to slide the speaker out. Use the plastic spudger to slide the speaker out. Use the plastic spudger to slide the speaker out.
    • Use the plastic spudger to slide the speaker out.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Akitaka Hashimoto

Üyelik tarihi: 27-03-2018

360 İtibar

2 adet Kılavuz yazıldı

Takım

IUPUI, Team S3-G2, Harley Spring 2018 IUPUI, Team S3-G2, Harley Spring 2018 üyesi

IUPUI-HARLEY-S18S3G2

3 Üyeler

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 6

Her zaman: 135