Ana içeriğe geç

What you need

  1. RIDGID R84015 X2 Disassembly, RIDGID R84015 X2 Case Removal: adım 1, 2 resimden 1. RIDGID R84015 X2 Disassembly, RIDGID R84015 X2 Case Removal: adım 1, 2 resimden 2.
    • Remove the backplate.

    • Using a Torx T20 screwdriver, remove the four screws attaching the back plate.

  2. RIDGID R84015 X2 Disassembly: adım 2, 1 resimden 1.
    • Remove the drill handle.

    • Using the Phillips #2 screwdriver, remove the five screws attaching the drill handle to the body.

  3. RIDGID R84015 X2 Disassembly: adım 3, 2 resimden 1. RIDGID R84015 X2 Disassembly: adım 3, 2 resimden 2.
    • Remove the gear casing from the body.

    • Using the Philips #2 screwdriver, remove the four screws attaching the gear casing to the body.

  4. RIDGID R84015 X2 Disassembly, RIDGID R84015 X2 Disassembly: adım 4, 1 resimden 1.
    • With your drill taken apart, move your attention to the trigger and forward reverse switch.

  5. RIDGID R84015 X2 Disassembly: adım 5, 1 resimden 1.
    • Check to see that the forward reverse switch isn't broken.

    • NOTE: small tab on trigger fits into groove on forward reverse switch

  6. RIDGID R84015 X2 Disassembly: adım 6, 1 resimden 1.
    • With the battery attached, check that the wires work when the trigger is pulled.

    • Put multimeter wires here.

    • If wires work and drill doesn't, the problem is with the motor.

  7. RIDGID R84015 X2 Disassembly: adım 7, 1 resimden 1.
    • Make sure plastic is not broken and switch is not stuck.

Bitiş Çizgisi

2 farklı kişi bu kılavuzu tamamladı.

Brian

Üyelik tarihi: 12-04-2010

97 İtibar

1 Kılavuz yazıldı

Team

Cal Poly, Team 15-48, Garner Spring 2010 Cal Poly, Team 15-48, Garner Spring 2010 üyesi

CPSU-GARNER-S10S15G48

6 Üyeler

10 adet Kılavuz yazıldı

One Comment

I was able to diagnose and fix my problem with my black and decker following your instructions. TY

boxingchaos2011 - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 11

Son 30 gün: 42

Her zaman: 13,036