Eşyalarını Tamir Et Topluluk Mağaza

Razer Blade 15" (2020) Back Cover Replacement

Giriş

Use this guide to remove or replace the back cover on your Razer Blade 15" (2020) laptop.

Neye ihtiyacın var

  1. Razer Blade 15" (2020) Back Cover Replacement, Unfasten the back cover: adım 1, 1 resimden 1.

    • Use a T5 Torx driver to remove the ten 3.7 mm-long screws securing the back cover.

    Düzenle

  3. Razer Blade 15" (2020) Back Cover Replacement, Loosen the back cover: adım 2, 3 resimden 1. Razer Blade 15" (2020) Back Cover Replacement, Loosen the back cover: adım 2, 3 resimden 2. Razer Blade 15" (2020) Back Cover Replacement, Loosen the back cover: adım 2, 3 resimden 3.

    • The back cover is lightly secured to the motherboard by thermal pads. Depending on the age of your laptop, it may be easier or harder to remove.

    • Use a finger to pry up the right side of the back cover, starting at the Ethernet port cutout.

    Düzenle

  4. Razer Blade 15" (2020) Back Cover Replacement, Remove the back cover: adım 3, 3 resimden 1. Razer Blade 15" (2020) Back Cover Replacement, Remove the back cover: adım 3, 3 resimden 2. Razer Blade 15" (2020) Back Cover Replacement, Remove the back cover: adım 3, 3 resimden 3.

    • Remove the back cover slowly, as to avoid tearing the thermal pads underneath.

    • Lay the back cover down on its rubber feet to avoid damaging the thermal pads on its underside.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

Clay Eickemeyer

Üyelik tarihi: 09/19/22

67.203 İtibar

453 adet Kılavuz yazıldı

Rozetler: 37

+34 tane daha rozet

Ekip

iFixit iFixit üyesi

Staff

136 Üyeler

17.410 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 27

Her zaman: 235