Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

This guide will demonstrate how to replace the hard drive of the Razer Blade Stealth 2016.

  1. Turn the laptop over so it's upside down.
    • Turn the laptop over so it's upside down.

  2. Using a Torx T4 screwdriver, remove the eight 3 mm screws that secure the bottom cover.
    • Using a Torx T4 screwdriver, remove the eight 3 mm screws that secure the bottom cover.

  3. Carefully lift the bottom cover off of the laptop.
    • Carefully lift the bottom cover off of the laptop.

  4. LCD iPhone Ekran Tamir Kit'leri

    Ömür Boyu Garantimiz kapsamındaki bütçe seçeneği.

    Shop Kits

    LCD iPhone Ekran Tamir Kit'leri

    Onarım maliyetlerini düşürün, kaliteyi değil.

    Shop Kits
  5. Carefully remove the tabs from their slots of the silver piece of foil.
    • Carefully remove the tabs from their slots of the silver piece of foil.

  6. Slowly peel back the silver piece and black tape beneath it to reveal the hard drive.
    • Slowly peel back the silver piece and black tape beneath it to reveal the hard drive.

  7. Using a Phillips #00 screwdriver, remove the 2.5 mm screw on the left side of the hard drive. Using a Phillips #00 screwdriver, remove the 2.5 mm screw on the left side of the hard drive.
    • Using a Phillips #00 screwdriver, remove the 2.5 mm screw on the left side of the hard drive.

  8. Carefully slide the hard drive out from its slot. Carefully slide the hard drive out from its slot.
    • Carefully slide the hard drive out from its slot.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Lindsay Grant

Üyelik tarihi: 10-10-2019

340 İtibar

3 adet Kılavuz yazıldı

Takım

USF Tampa, Team S1-G4, Leahy Fall 2019 USF Tampa, Team S1-G4, Leahy Fall 2019 üyesi

USFT-LEAHY-F19S1G4

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 6

Son 30 gün: 38

Her zaman: 156