Ana içeriğe geç

Razor A Wheel Replacement

Neye ihtiyacın var

  1. Razor A Wheel Replacement, Wheel: adım 1, 1 resimden 1.
    • Flip the scooter upside-down with the handlebars and brake on the ground.

  2. Razor A Wheel Replacement: adım 2, 2 resimden 1. Razor A Wheel Replacement: adım 2, 2 resimden 2.
    • Grab two 3/16" Allen wrenches. Insert one in each screw on the sides of the wheel. Hold one screw in place while turning the other in a counter-clockwise direction, loosening the screw.

    • Once both screws are removed the wheel should be free and fall out.

    • One of the screws fits inside the other. The inner screw should be 5.6 mm in length. During reassembly, the screws can be put back in on either side.

    • During reassembly, do not over-tighten the screws, as you could strip them. They should be just tight enough to prevent the wheel from wobbling.

  3. Razor A Wheel Replacement: adım 3, 2 resimden 1. Razor A Wheel Replacement: adım 3, 2 resimden 2.
    • When replacing a wheel, look for a metal sleeve in the center of the bearing that may be out of line. Forcing a screw through a sleeve that is out of line could ruin the wheel.

    • Remove any obstructions inside the bearing of the new wheel, and move the inner sleeve in the bearing with an Allen key so that the screws can slide into the bearing freely.

    • Put the replacement wheel into place in the scooter frame.

    • For extra security, you can add a small amount of threadlocker glue to the the bolt and tighten it just until until it doesn't fall off or lock the wheel.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Jordyn

Üyelik tarihi: 10/09/12

544 İtibar

5 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 9-13, Amido Fall 2012 Cal Poly, Team 9-13, Amido Fall 2012 üyesi

CPSU-AMIDO-F12S9G13

4 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 5

Son 30 gün: 19

Her zaman: 12,668