Eşyalarını Tamir Et Topluluk Mağaza

Razor Hovertrax 2.0 Anti-Slip Pads Replacement

Giriş

The anti-slip pads are built in to stop your feet from slipping off the Hovertrax board and losing control of the wheel motors.

Neye ihtiyacın var

  1. Razor Hovertrax 2.0 Anti-Slip Pads Replacement, Anti-Slip Pads: adım 1, 1 resimden 1.

    • Choose an area to access and slip the Jimmy blade to pry open the pad.

    • We recommend prying the pad open from the top and bottom instead of the sides due to the plastic wheel cover blocking the access point.

    Düzenle

  3. Razor Hovertrax 2.0 Anti-Slip Pads Replacement: adım 2, 1 resimden 1.

    • After using the Jimmy tool to open up the area, use your hands and slowly peel off the adhesive from the pad and board.

    • You may be required to remove the remaining adhesive on the board.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Dang Nguyen

Üyelik tarihi: 09/08/23

217 İtibar

2 adet Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

University of New Orleans, Team 3-1, McDonald Fall 2023 University of New Orleans, Team 3-1, McDonald Fall 2023 üyesi

UNO-MCDONALD-F23S3G1

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 23