Giriş

Many times, the speaker or the camera in this model of the Sony Ericsson cease to function. This is a guide that will show you how to reach these so that you can replace them quickly and without needing to send it in.

Flick the two lock tabs into the unlocked positions by pushing each button forward.
  • Flick the two lock tabs into the unlocked positions by pushing each button forward.

Yorum Ekle

Pop the back cover up using the groove on the top of the phone.
  • Pop the back cover up using the groove on the top of the phone.

Yorum Ekle

  • You can now access the phone's battery.

  • Using a spudger, remove the battery and set it aside.

Yorum Ekle

  • Two rubber buttons cover the bottom two screws. Remove these rubber coverings to access the phone screws.

  • Using a T6 torx wrench, remove the four small screws at the top and bottom corners on the backside of the phone.

Yorum Ekle

  • Carefully pry off the faceplate using a spudger. Insert the spudger into the middle of the phone.

  • Start near a button and carefully work your way around the phone until the faceplate pops off.

Yorum Ekle

  • Remove the plastic and metal buttons located around the seam and place off to the side.

  • Be careful not to lose them!

Yorum Ekle

  • With a tweezer, pry off the back metal plate.

Yorum Ekle

  • The speaker and camera combo is accessible after the removal of two small #00 screws. Use the #00 Philips Screwdriver for this step.

  • The piece is now free to move from the phone core.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Bob

Üyelik tarihi: 15-04-2013

301 İtibar

6 adet Kılavuz yazıldı

Takım

SUNY Cortland, Team 1-3, Getto Spring 2013 SUNY Cortland, Team 1-3, Getto Spring 2013 üyesi

SUNYCORT-GETTO-S13S1G3

3 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 10

Son 30 Gün: 15

Her zaman: 599