Eşyalarını Tamir Et Topluluk Mağaza

RedOctane X-Plorer Rear Case Replacement

Giriş

To access the internal components of the guitar and diagnose problems, you must remove the rear case. This guide will demonstrate how to remove the rear case properly.

Neye ihtiyacın var

  1. RedOctane X-Plorer Rear Case Replacement, Rear Case: adım 1, 2 resimden 1. RedOctane X-Plorer Rear Case Replacement, Rear Case: adım 1, 2 resimden 2.

    • Remove the strap by pulling it off of the mounts located on the body and neck.

    Düzenle

  3. RedOctane X-Plorer Rear Case Replacement: adım 2, 3 resimden 1. RedOctane X-Plorer Rear Case Replacement: adım 2, 3 resimden 2. RedOctane X-Plorer Rear Case Replacement: adım 2, 3 resimden 3.

    • Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.

    • Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.

    • These screws can also be Torx on some models.

    • Pull off the rear case.

    Düzenle

  4. RedOctane X-Plorer Rear Case Replacement: adım 3, 3 resimden 1. RedOctane X-Plorer Rear Case Replacement: adım 3, 3 resimden 2. RedOctane X-Plorer Rear Case Replacement: adım 3, 3 resimden 3.

    • Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.

    • Pull off the top shell of the neck to expose the internal features.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

6 tane daha katılımcı ile

Riley

Üyelik tarihi: 04/18/18

649 İtibar

7 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

Cal Poly, Team S17-G1, Livingston Spring 2018 Cal Poly, Team S17-G1, Livingston Spring 2018 üyesi

CPSU-LIVINGSTON-S18S17G1

3 Üyeler

9 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 6

Her zaman: 527