Eşyalarını Tamir Et Topluluk Mağaza

RedOctane X-Plorer Strum Bar Replacement

Giriş

The guitar strings often catch on the plastic case or wear over time. This guide demonstrates how to access the internal components of the strings and diagnose hidden problems.

Neye ihtiyacın var

  1. RedOctane X-Plorer Strum Bar Replacement, Rear Case: adım 1, 2 resimden 1. RedOctane X-Plorer Strum Bar Replacement, Rear Case: adım 1, 2 resimden 2.

    • Remove the strap by pulling it off of the mounts located on the body and neck.

    Düzenle

  2. RedOctane X-Plorer Strum Bar Replacement: adım 2, 3 resimden 1. RedOctane X-Plorer Strum Bar Replacement: adım 2, 3 resimden 2. RedOctane X-Plorer Strum Bar Replacement: adım 2, 3 resimden 3.

    • Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.

    • Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.

    • These screws can also be Torx on some models.

    • Pull off the rear case.

    Düzenle

  4. RedOctane X-Plorer Strum Bar Replacement: adım 3, 3 resimden 1. RedOctane X-Plorer Strum Bar Replacement: adım 3, 3 resimden 2. RedOctane X-Plorer Strum Bar Replacement: adım 3, 3 resimden 3.

    • Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.

    • Pull off the top shell of the neck to expose the internal features.

    Düzenle

  5. RedOctane X-Plorer Strum Bar Replacement, Strum Bar: adım 4, 1 resimden 1.

    • Using two hands, gently remove the two string rod fixtures.

    Düzenle

  6. RedOctane X-Plorer Strum Bar Replacement: adım 5, 1 resimden 1.

    • Lift up on the strum bar to remove it from the guitar.

    Düzenle

  7. RedOctane X-Plorer Strum Bar Replacement: adım 6, 2 resimden 1. RedOctane X-Plorer Strum Bar Replacement: adım 6, 2 resimden 2.

    • Remove the string rod by gently pulling it out of the strum bar.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

4 farklı kişi bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Jared McMullen

Üyelik tarihi: 04/18/18

276 İtibar

1 Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

Cal Poly, Team S17-G1, Livingston Spring 2018 Cal Poly, Team S17-G1, Livingston Spring 2018 üyesi

CPSU-LIVINGSTON-S18S17G1

3 Üyeler

9 adet Kılavuz yazıldı

2 Yorum

This did not help.

michelle Coronel - Yanıt

I had a squeaking strum bar so I followed this guide to dismantle and clean the parts. Other than the one step missed in the guide it was easy to follow. It also stopped the squeaking!

Zachary Avery - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 7

Son 7 gün: 19

Son 30 gün: 49

Her zaman: 3,583