Parçalar

Hiçbir parçaya gerek yok.

Remove the screws from the bottom, right, and left side of camera. Remove the screws from the bottom, right, and left side of camera. Remove the screws from the bottom, right, and left side of camera.
  • Remove the screws from the bottom, right, and left side of camera.

Yorum Ekle

Remove the back of the camera, may require force.
  • Remove the back of the camera, may require force.

Yorum Ekle

Unscrew the right metal bracket of the viewing lens
  • Unscrew the right metal bracket of the viewing lens

Yorum Ekle

Unscrew the top right corner screw
  • Unscrew the top right corner screw

Yorum Ekle

Mac RAM Kitleri
Mac'inizi hızlandırın. Hafızasını en yükseğe çıkar.
Mac RAM Kitleri
Mac'inize daha fazla bellek alın.
Unscrew the bottom right corner screw.
  • Unscrew the bottom right corner screw.

Yorum Ekle

Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force. Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.
  • Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.

Yorum Ekle

Pull the front of the camera off of the mother board. Pull the front of the camera off of the mother board.
  • Pull the front of the camera off of the mother board.

Yorum Ekle

Unhinge the outer case of the screen from the back of the camera. The screen should still be hanging by wires.
  • Unhinge the outer case of the screen from the back of the camera. The screen should still be hanging by wires.

Yorum Ekle

Remove outer case/rim of screen from the back of the camera. The screen should still be hanging by the red wire and white wire.
  • Remove outer case/rim of screen from the back of the camera. The screen should still be hanging by the red wire and white wire.

Yorum Ekle

Pull out the red wire and white wire attaching the screen to the motherboard.
  • Pull out the red wire and white wire attaching the screen to the motherboard.

Yorum Ekle

Flip up black lever holding data cable to motherboard, and remove data cable from motherboard.
  • Flip up black lever holding data cable to motherboard, and remove data cable from motherboard.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Melissa

Üyelik tarihi: 12-02-2013

240 İtibar

2 adet Kılavuz yazıldı

Takım

Ohio State, Team 1-2, Buehl Spring 2013 Ohio State, Team 1-2, Buehl Spring 2013 üyesi

OSU-BUEHL-S13S1G2

2 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 1

Her zaman: 132