Giriş

This guide will demonstrate removing the computer's processor.

Parçalar

Hiçbir parçaya gerek yok.

Place the case on its side.
  • Place the case on its side.

  • Locate and remove the two 13.1 mm thumbscrews.

Yorum Ekle

Slide the side panel towards the back and remove.
  • Slide the side panel towards the back and remove.

Yorum Ekle

Locate the processor's heat sink and fan.
  • Locate the processor's heat sink and fan.

Yorum Ekle

Remove the fan's power cable from the motherboard.
  • Remove the fan's power cable from the motherboard.

Yorum Ekle

Locate and unscrew the four Phillips #0 screws at the corners of the fan.
  • Locate and unscrew the four Phillips #0 screws at the corners of the fan.

  • The screws will not come out completely.

Yorum Ekle

Remove the fan and heat sink.
  • Remove the fan and heat sink.

Yorum Ekle

Gently press down and release the silver lever.
  • Gently press down and release the silver lever.

Yorum Ekle

Open the metal casing over the processor.
  • Open the metal casing over the processor.

Yorum Ekle

Gently lift up the processor, holding by the edges only.
  • Gently lift up the processor, holding by the edges only.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Note: For reassembly on step seven, make sure the corner of the processor with the gold triangle is pointing towards the release lever.

9 başka kişi bu kılavuzu tamamladı.

James Aldag

Üyelik tarihi: 20-10-2011

327 İtibar

8 adet Kılavuz yazıldı

Takım

Cal Poly, Team 6-8, Regan Fall 2011 Cal Poly, Team 6-8, Regan Fall 2011 üyesi

CPSU-REGAN-F11S6G8

4 Üyeler

16 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 5

Son 30 Gün: 35

Her zaman: 6,780