Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Removing Fender Frontman 15r Back panel

Neye ihtiyacın var

  1. Removing Fender Frontman 15r Back panel, Back panel: adım 1, 1 resimden 1.
    • Be sure to unplug the device before proceeding.

    • Use a Phillips #0 screwdriver to remove the four 21.7mm screws holding the back panel to the frame.

  2. Removing Fender Frontman 15r Back panel: adım 2, 1 resimden 1.
    • Once the screws are out, use a plastic opening tool or spudger to pry the top of the back panel open. There may be some resistance, but it will eventually pry loose.

  3. Removing Fender Frontman 15r Back panel: adım 3, 1 resimden 1.
    • Once the top is separated, use your hand to remove the back panel from the unit.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Greg Sawers

Üyelik tarihi: 09/27/12

85 İtibar

3 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 24-30, Regan Fall 2012 Cal Poly, Team 24-30, Regan Fall 2012 üyesi

CPSU-REGAN-F12S24G30

5 Üyeler

7 adet Kılavuz yazıldı

Bir Yorum

I need to know where to find a used circuit board for my Fender Frontman 15G. A circuit board from a Fender Frontman 15R will also work. Please help me.

sparkyman401 - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 7

Son 30 gün: 23

Her zaman: 6,624