Giriş

This guide will show you how to remove the laptop RAM.

Parçalar

Hiçbir parçaya gerek yok.

  1. Place the laptop on a fat surface with the underside facing up Remove the 4 Philips head screws.
    • Place the laptop on a fat surface with the underside facing up

    • Remove the 4 Philips head screws.

    • Turn the computer over and open the display

    • Grasping each side of the palm rest, gently lift it off and rotate toward the front of the laptop

    • The palm rest will be connected to the main board by a ribbon cable

  2. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  3. Disconnect the touchpad ribbon cable
    • Disconnect the touchpad ribbon cable

    • This step is recommended in the service manual however it is possible to remove the RAM without discoinnecting the touchpad cable

  4. Locate the RAM modules
    • Locate the RAM modules

    • Gently press the metal tabs outwards to release the top RAM module and remove it from the laptop

    • With the top RAM module removed you can release the lower RAM module in the same manner.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 başka kişi bu kılavuzu tamamladı.

Glac1er

Üyelik tarihi: 25-05-2013

144 İtibar

1 Kılavuz yazıldı

Takım

Glac1er Glac1er üyesi

Community

1 Üye

1 Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 8

Son 30 Gün: 61

Her zaman: 7,445