Eşyalarını Tamir Et Topluluk Mağaza

Magellan RoadMate 1200 Back Cover Replacement

Giriş

After you remove the back cover, you can get to any part of your RoadMate.

Neye ihtiyacın var

  1. Magellan RoadMate 1200 Back Cover Replacement, Back Cover: adım 1, 2 resimden 1. Magellan RoadMate 1200 Back Cover Replacement, Back Cover: adım 1, 2 resimden 2.

    • Remove the four rubber caps from the back by using the Phillips #00 screwdriver.

    Düzenle

  2. Magellan RoadMate 1200 Back Cover Replacement: adım 2, 1 resimden 1.

    • Remove the four screws holding the cover in place by using the Phillips #00 screwdriver.

    Düzenle

  4. Magellan RoadMate 1200 Back Cover Replacement: adım 3, 2 resimden 1. Magellan RoadMate 1200 Back Cover Replacement: adım 3, 2 resimden 2.

    • Remove the back cover from the device by separating the back cover along its seam.

    • Slowly lift the cover—the speaker is screwed onto the back cover and is connected to the circuit board.

    Düzenle

  5. Magellan RoadMate 1200 Back Cover Replacement: adım 4, 2 resimden 1. Magellan RoadMate 1200 Back Cover Replacement: adım 4, 2 resimden 2.

    • Pull the speaker cord, horizontally, by its base, away from the motherboard.

    • When reassembling, make sure that you plug the terminal in the same way. The black wire should be on the side farthest from the battery.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

6 tane daha katılımcı ile

Ross Light

Üyelik tarihi: 04/12/10

217 İtibar

6 adet Kılavuz yazıldı

Rozetler: 12

+9 tane daha rozet

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 3,467