Giriş

Removing and replacing the DVD-ROM drive.

Parçalar

Hiçbir parçaya gerek yok.

  1. Pull on outer latch. Lower door until it is level with your work surface.
    • Pull on outer latch.

    • Lower door until it is level with your work surface.

    • Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.

  2. Removing the faceplate. On the inside of the case, find the two plastic tabs.
    • Removing the faceplate.

    • On the inside of the case, find the two plastic tabs.

    • While depressing the tabs, remove the faceplate by pulling and rotating outward.

  3. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Remove the two screws on the front of the drive with the Phillips #1 screwdriver.
    • Remove the two screws on the front of the drive with the Phillips #1 screwdriver.

  5. Pull the drive out to allow access to the power and ribbon cables. Do not fully remove. Remove both the power and ribbon cable. Remove both the power and ribbon cable.
    • Pull the drive out to allow access to the power and ribbon cables. Do not fully remove.

    • Remove both the power and ribbon cable.

Bitiş Çizgisi

23 farklı kişi bu kılavuzu tamamladı.

Justin Petrilli

Üyelik tarihi: 21-01-2010

2.652 İtibar

11 adet Kılavuz yazıldı

Takım

Cal Poly, Team 13-24, Maness Winter 2010 Cal Poly, Team 13-24, Maness Winter 2010 üyesi

CPSU-MANESS-W10S13G24

4 Üyeler

18 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 4

Son 30 Gün: 25

Her zaman: 8,875