Ana içeriğe geç

Giriş

Outline what you are going to teach someone how to do.

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the three screws running along the back edge of case cover. Then, remove the two screws from each side of case cover.
    • Remove the three screws running along the back edge of case cover.

    • Then, remove the two screws from each side of case cover.

  2. Grab edges of cover. Pull outward, slightly, then straight up.
    • Grab edges of cover. Pull outward, slightly, then straight up.

  3. Be sure case cover has been removed prior to back panel removal. Remove 5 screws from panel, as shown.
    • Be sure case cover has been removed prior to back panel removal.

    • Remove 5 screws from panel, as shown.

  4. Use flat-head screwdriver to push in square tabs, located on each side of the back panel. Use caution, the edges are sharp.
    • Use flat-head screwdriver to push in square tabs, located on each side of the back panel.

    • Use caution, the edges are sharp.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Kevin

Üyelik tarihi: 26-04-2011

354 İtibar

8 adet Kılavuz yazıldı

Takım

Cal Poly, Team 18-20, Garner Spring 2011 Cal Poly, Team 18-20, Garner Spring 2011 üyesi

CPSU-GARNER-S11S18G20

4 Üyeler

11 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 4

Her zaman: 2,147