Eşyalarını Tamir Et Topluluk Mağaza

Kurio Touch 4S Power Button Replacement

Neye ihtiyacın var

  1. Kurio Touch 4S Power Button Replacement, Power Button: adım 1, 1 resimden 1.

    • Make sure to open the back cover easily using the plastic opening tool.

    Düzenle

  2. Kurio Touch 4S Power Button Replacement: adım 2, 3 resimden 1. Kurio Touch 4S Power Button Replacement: adım 2, 3 resimden 2. Kurio Touch 4S Power Button Replacement: adım 2, 3 resimden 3.

    • Remove back cover by prying away from the device.

    • The easiest place to remove the cover is from the bottom and top; try to open it from the right and left sides.

    • Open it gently. Do not open it with too much pressure, so that the plastic back cover do not break.

    Düzenle

  3. Kurio Touch 4S Power Button Replacement: adım 3, 2 resimden 1. Kurio Touch 4S Power Button Replacement: adım 3, 2 resimden 2.

    • To remove the battery, make sure the four 5mm Phillips screws on each side of your device is open using the Phillips #1 Screwdriver

    • After you remove your four 5mm Phillips screws, use your plastic opening tool to help you open the plastic cover of your device.

    Düzenle

  4. Kurio Touch 4S Power Button Replacement: adım 4, 1 resimden 1.

    • After you remove your four 5mm Philips screws use your plastic opening tool to help you open the plastic cover of your device.

    Düzenle

  6. Kurio Touch 4S Power Button Replacement: adım 5, 1 resimden 1.

    • Separate the two halves of your Kurio Touch 4S and lay them besides each other.

    Düzenle

  7. Kurio Touch 4S Power Button Replacement: adım 6, 1 resimden 1.

    • Gently remove the plastic cover that is covering the camera.

    Düzenle

  8. Kurio Touch 4S Power Button Replacement: adım 7, 1 resimden 1.

    • Use Phillips # 1 screw to open the four 5mm Philips screws on the motherboard.

    • Open the screws gently and do not apply too much force as you could damage the motherboard.

    Düzenle

  9. Kurio Touch 4S Power Button Replacement: adım 8, 1 resimden 1.

    • Use the plastic opener to remove the battery.

    Düzenle

  10. Kurio Touch 4S Power Button Replacement: adım 9, 1 resimden 1.

    • Use tweezers to remove the black tape that is attached to the motherboard.

    Düzenle

  11. Kurio Touch 4S Power Button Replacement: adım 10, 2 resimden 1. Kurio Touch 4S Power Button Replacement: adım 10, 2 resimden 2.

    • Detach all the wire that are connected to the motherboard.

    • Detach the camera module and other components that are attached to the motherboard.

    Düzenle

  12. Kurio Touch 4S Power Button Replacement: adım 11, 1 resimden 1.

    • Remove the motherboard with the help of plastic opener.

    • Detach the power plug before you remove the motherboard.

    Düzenle

  13. Kurio Touch 4S Power Button Replacement: adım 12, 1 resimden 1.

    • Use tweezers to hold the power button and gently lift it up.

    • Replace the old power button with the new one.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Moin Khan

Üyelik tarihi: 01/21/15

234 İtibar

2 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

USF Tampa, Team 6-5, Brown Winter 2015 USF Tampa, Team 6-5, Brown Winter 2015 üyesi

USFT-BROWN-W15S6G5

3 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 2

Her zaman: 463