Parçalar

Hiçbir parçaya gerek yok.

Flip device upside down and remove the 4 foam pads at each corner.
  • Flip device upside down and remove the 4 foam pads at each corner.

Yorum Ekle

  • Remove the 4 screws using a Philips Screwdriver.

Yorum Ekle

  • Gently lift the case off of the body and set down in a safe place.

Yorum Ekle

  • Unscrew Circuit board attached to the top of the case with the one screw in the center. Be careful not to strip the screw/break the circuit board.

Yorum Ekle

Make sure all of the buttons are move-able.
  • Make sure all of the buttons are move-able.

Yorum Ekle

  • Press buttons on circuit board while listening for a click.

Yorum Ekle

  • If everything works on the inside, that might mean you need a new circuit board.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Nicholas Roppolo

Üyelik tarihi: 25-10-2013

363 İtibar

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 3

Her zaman: 273