Giriş

Camera went completely dead - removed the front cover and found a screw loose. Replaced it and the camera worked fine. This could be a problem for others.

Follow guide “Disassembling Canon PowerShot SD1100 IS Front and Rear Cover”
  • Follow guide “Disassembling Canon PowerShot SD1100 IS Front and Rear Cover”

Yorum Ekle

Check inside camera for loose screw from this location (indicated by yellow arrow). Return the screw to location and  firmly tighten it. Reposition and tighten the covers.  Problem solved!
  • Check inside camera for loose screw from this location (indicated by yellow arrow). Return the screw to location and firmly tighten it. Reposition and tighten the covers. Problem solved!

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Frank

Üyelik tarihi: 13-04-2011

25 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 3

Her zaman: 665