Eşyalarını Tamir Et Topluluk Mağaza

Repairing Pioneer R1 Speaker Cables

Giriş

This guide will demonstrate how to access the R1's speakers and reattach them to the motherboard.

Neye ihtiyacın var

  1. Repairing Pioneer R1 Speaker Cables, Repairing Pioneer R1 Speaker Cables: adım 1, 1 resimden 1.

    • Insert your plastic spudger into the opening near the HDMI port.

    • Gently pry the back cover of the R1 from the the front by using the spudger along the edges.

    • Do not pull the back cover straight off the R1. You may further damage the cables connecting the speakers to the motherboard.

    Düzenle

  3. Repairing Pioneer R1 Speaker Cables: adım 2, 1 resimden 1.

    • Lay the R1 flat like an open book.

    • This will prevent further damage to the cables connecting the speakers to the motherboard.

    Düzenle

  4. Repairing Pioneer R1 Speaker Cables: adım 3, 2 resimden 1. Repairing Pioneer R1 Speaker Cables: adım 3, 2 resimden 2.

    • Solder the black cable of the left speaker to the nodule marked L+ on the motherboard.

    • Do not allow solder from one nodule to touch another nodule. This will cause the speakers to malfunction.

    • Solder the black cable of the Right speaker to the nodule marked R+ on the motherboard.

    • Solder the red cable of the left speaker to the nodule marked L- on the motherboard.

    • Solder the red cable of the right speaker to the nodule marked R- on the motherboard.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Christopher Rosario

Üyelik tarihi: 02/17/15

411 İtibar

4 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

San Diego State, Team 1-1, Sheppard Winter 2015 San Diego State, Team 1-1, Sheppard Winter 2015 üyesi

SDSU-SHEPPARD-W15S1G1

3 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 141