Giriş

How to disassemble the laptop in case to clean the cooling / fan system.


Please SUBSCRIBE to my channel ツ

Videoya Genel Bakış

Switch-off the laptop and remove the battery. Switch-off the laptop and remove the battery.
  • Switch-off the laptop and remove the battery.

Yorum Ekle

To remove the Keyboard you must open 7x locking clips. You can use a cutter and a plastic tool. You can use a cutter and a plastic tool.
  • To remove the Keyboard you must open 7x locking clips.

  • You can use a cutter and a plastic tool.

Yorum Ekle

Remove the Keyboard. Remove the HDD, RAM Memory cover. Remove the HDD, RAM Memory cover.
  • Remove the Keyboard.

  • Remove the HDD, RAM Memory cover.

Yorum Ekle

Remove the HDD and the DVD optical drive. Remove the HDD and the DVD optical drive. Remove the HDD and the DVD optical drive.
  • Remove the HDD and the DVD optical drive.

Yorum Ekle

Unscrew the screws from the upper and the bottom cases. Unscrew the screws from the upper and the bottom cases.
  • Unscrew the screws from the upper and the bottom cases.

Yorum Ekle

With a plastic tool you can separate the bottom case from the laptop. With a plastic tool you can separate the bottom case from the laptop. With a plastic tool you can separate the bottom case from the laptop.
  • With a plastic tool you can separate the bottom case from the laptop.

Yorum Ekle

Disconnect the CPU fan cable connector. Now you have 4x screws on the CPU side and 2x on the fan. Now you have 4x screws on the CPU side and 2x on the fan.
  • Disconnect the CPU fan cable connector.

  • Now you have 4x screws on the CPU side and 2x on the fan.

Yorum Ekle

Separate the fan from the radiator. Clean the radiator and the fan. Use a soft brush. Clean the radiator and the fan. Use a soft brush.
  • Separate the fan from the radiator.

  • Clean the radiator and the fan. Use a soft brush.

Yorum Ekle

Put thermal compose to the main CPU and you are ready for assembling. After the start-up, check if the fan works. .

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

10 başka kişi bu kılavuzu tamamladı.

ZFix

Üyelik tarihi: 09-12-2013

153.600 İtibar

431 adet Kılavuz yazıldı

Takım

Master Techs Master Techs üyesi

Community

277 Üyeler

725 adet Kılavuz yazıldı

7 Yorum

Very good, thank you. :-)

andymcleod - Yanıt

I' thank you too. :)

ZFix -

Absolutely awesome job!

Thanks a plenty.

SolaJ

SolarJ - Yanıt

Can't you just leave fan assembly installed and start cleaning it with brush and compressed air once you have bottom case cover off? What about just blowing air thru the grill covering the fan and not even removing the bottom case cover?

bikeboatski - Yanıt

I just red it and found it's not for me. But i still felt I'd instantly send $1 to the author, besides those points, which i do not care of.

So I suggest to FIXIT.COM to offer it optionally. I meean... Optinally if you want you may send $1 or more to the author.... and I would put "1" ass default. I want it tobe JUST ONE CLICK. Otherwise I leave.

Jon Pol - Yanıt

Merci, j'ai réussi à ouvrir mon Toshiba grâce à ce tuto. J'ai dû changer le ventilateur qui était bruillant. http://ventilaptop.com/toshiba/580002-ve...

Hoti - Yanıt

Amazing, I’ve been wanting to open my laptop for months now this helped so much. Thank you

Nightcore Beats - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 18

Son 7 Gün: 115

Son 30 Gün: 464

Her zaman: 23,474