Eşyalarını Tamir Et Topluluk Mağaza

Repairing a plastic drill bit for a toy drill

Giriş

This technique can used to support and fix the broken plastic portions of a number of plastic toys with parts that frequently snap such as axles, spouts, legs etc.

Neye ihtiyacın var

  1. Repairing a plastic drill bit for a toy drill, Repairing a plastic drill bit for a toy drill: adım 1, 1 resimden 1.

    • Match up the broken plastic part and check that the pieces align.

    • The plastic part was hollow and had space to insert the wood support.

    Düzenle

  2. Repairing a plastic drill bit for a toy drill: adım 2, 1 resimden 1.

    • Tools needed:

    • - Glue (Super glue, Wood Glue or Tacky glue)

    • - A bamboo chopstick from your favorite chinese restaurant

    Düzenle

  4. Repairing a plastic drill bit for a toy drill: adım 3, 1 resimden 1.

    • Cut the chopstick to the required size using a sharp knife.

    • Some trimming and shaving may be needed depending on the plastic part and the wooden dowel with the objective of to get a tight fit.

    Düzenle

  5. Repairing a plastic drill bit for a toy drill: adım 4, 1 resimden 1.

    • Apply a drop of glue to the ends of the wooden dowel.

    Düzenle

  6. Repairing a plastic drill bit for a toy drill: adım 5, 1 resimden 1.

    • Insert the wooden dowel into one part of the broken plastic part.

    Düzenle

  7. Repairing a plastic drill bit for a toy drill: adım 6, 2 resimden 1. Repairing a plastic drill bit for a toy drill: adım 6, 2 resimden 2.

    • Insert the other end of the wooden dowel into the other end of the plastic toy.

    • Push the ends together to get a tight and clean fit.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

4 tane daha katılımcı ile

claudius

Üyelik tarihi: 12/12/10

29 İtibar

2 adet Kılavuz yazıldı

Rozetler: 4

+1 tane daha rozet

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 5

Her zaman: 3,384