Ana içeriğe geç

Parçalar

Hiçbir parça belirtilmedi.

  1. Open the latch on the right side that secures the battery in place. Open the latch on the left side that secures the battery in place. Now remove the battery.
    • Open the latch on the right side that secures the battery in place.

    • Open the latch on the left side that secures the battery in place.

    • Now remove the battery.

  2. Use the Philips screwdriver to remove the two screws on the bottom cover. Check the markers to determine how to remove the cover. Now remove the cover as prescribed by the markers.
    • Use the Philips screwdriver to remove the two screws on the bottom cover.

    • Check the markers to determine how to remove the cover.

    • Now remove the cover as prescribed by the markers.

  3. The components HDD hard disk and BIOS battery are now visible.
    • The components HDD hard disk and BIOS battery are now visible.

  4. Pull out the plug of the battery first. Then carefully remove the battery (attention glue).
    • Pull out the plug of the battery first.

    • Then carefully remove the battery (attention glue).

Sonuç

To assemble the device again, proceed in reverse order.

Bu çevirmenlere özel teşekkürler:

100%

irlanda dünyayı onarmamıza yardım ediyor! Katkıda bulunmak ister misiniz?
Çeviriye Başlayın ›

Felice Suglia

Üyelik tarihi: 15-06-2013

14.724 İtibar

150 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 140