Giriş

How to replace the speaker.

  1. Slide the battery release latch to the right.
    • Slide the battery release latch to the right.

    • Pull out the battery out towards the front of the device.

  2. Remove the 7 mm Phillips #0 screws.
    • Remove the 7 mm Phillips #0 screws.

    • Remove the 10 mm Phillips #0 screws.

    • Remove the 14 mm Phillips #0 screw.

    • Open the flap on the left hand side.

    • Insert the plastic opening tools between the right and left sides of the latch.

    • Pry the right side of the latch, and then pry the left side to detach the laptop's cover.

    • Open the flap on the right side.

    • Insert the plastic opening tools towards the right side of the latch.

    • Gently pry the right side out to release the top cover.

    • Lift the keyboard slowly.

    • A cable connects the keyboard to the motherboard. If you are not careful, you will damage the cable.

    • Use your fingers or a spudger to detach the connector.

    • Carefully lift and remove the keyboard.

    • Slowly and carefully lift the speaker with your fingers.

    • The port that the speaker plugs into can be easily removed from the motherboard if not careful! Unplug the speaker with extreme caution!

    • Use your fingers to unplug the wires from the connector.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Derek Driscoll

Üyelik tarihi: 15-04-2010

119 İtibar

8 adet Kılavuz yazıldı

Takım

Cal Poly, Team 26-27, Regan Spring 2010 Cal Poly, Team 26-27, Regan Spring 2010 üyesi

CPSU-REGAN-S10S26G27

3 Üyeler

18 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 1

Son 30 Gün: 3

Her zaman: 1,511