Eşyalarını Tamir Et Topluluk Mağaza

Replacing a Zipper Pull Tab on your Patagonia Jacket

Giriş

Make it easier to zip up your favorite jacket by replacing a missing zipper pull tab. It only takes a few minutes and afterward you’ll be able to grib your zipper pull with mittens or gloves.

For replacement parts or further assistance, contact Patagonia Customer Service.

Videoya Genel Bakış

Zipper pull replacement overview.

  1. Replacing a Zipper Pull Tab on your Patagonia Jacket, Zipper Pull Tab: adım 1, 2 resimden 1. Replacing a Zipper Pull Tab on your Patagonia Jacket, Zipper Pull Tab: adım 1, 2 resimden 2.

    • Get your new zipper pull and position it with the pull-tab down.

    • Lift up the zipper, as if you were pulling the zipper closed.

    Düzenle

  2. Replacing a Zipper Pull Tab on your Patagonia Jacket: adım 2, 3 resimden 1. Replacing a Zipper Pull Tab on your Patagonia Jacket: adım 2, 3 resimden 2. Replacing a Zipper Pull Tab on your Patagonia Jacket: adım 2, 3 resimden 3.

    • Insert the zipper pull into the smaller hole in the zipper. This is the top hole when the zipper is hanging normally.

    • Pull the zipper pull through the smaller hole.

    Düzenle

  4. Replacing a Zipper Pull Tab on your Patagonia Jacket: adım 3, 2 resimden 1. Replacing a Zipper Pull Tab on your Patagonia Jacket: adım 3, 2 resimden 2.

    • Rest the zipper back in its normal, hanging position.

    • Take top end of the zipper pull and insert it into the bigger, lower hole in the zipper.

    Düzenle

  5. Replacing a Zipper Pull Tab on your Patagonia Jacket: adım 4, 2 resimden 1. Replacing a Zipper Pull Tab on your Patagonia Jacket: adım 4, 2 resimden 2.

    • Pull the top of the zipper pull through the hole to create a loop on the backside of the zipper.

    • Bring the zipper pull-tab through the loop.

    Düzenle

  6. Replacing a Zipper Pull Tab on your Patagonia Jacket: adım 5, 2 resimden 1. Replacing a Zipper Pull Tab on your Patagonia Jacket: adım 5, 2 resimden 2.

    • Pull the zipper pull-tab snug.

    • The zipper pull should now be inserted and lay flat.

    Düzenle
Bitiş Çizgisi

4 farklı kişi bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Brittany McCrigler

Üyelik tarihi: 03/05/12

89.014 İtibar

131 adet Kılavuz yazıldı

Rozetler: 48

+45 tane daha rozet

Ekip

iFixit iFixit üyesi

Staff

135 Üyeler

16.817 adet Kılavuz yazıldı

Bir Yorum

Awesome! Thanks for the training!

Kathleen Hutton - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 gün: 31

Son 30 gün: 147

Her zaman: 24,476