Ana içeriğe geç

Replacing the Battery of the Fujitsu Primergy

Neye ihtiyacın var

Öne Çıkan Belge

  1. Replacing the Battery of the Fujitsu Primergy, Open the Case: adım 1, 1 resimden 1.
    • Pull the green tab on the side and pull back the panel

    • Remove the panel and store it somewhere

    • On page 37 of the manual there is a description similar to that of this article

  2. Replacing the Battery of the Fujitsu Primergy, Remove the fan on the CPUs: adım 2, 1 resimden 1.
    • Press the two green tabs and pull up the fan on the CPUs

    • Be careful to take it easy, the fan cable is short (red arrow)

  3. Replacing the Battery of the Fujitsu Primergy, Remove PCIe cards: adım 3, 2 resimden 1. Replacing the Battery of the Fujitsu Primergy, Remove PCIe cards: adım 3, 2 resimden 2.
    • Press on the green clips

    • Slowly pull the cards out of the slots

    • It would be advisable to connect to the ground first

  4. Replacing the Battery of the Fujitsu Primergy, Remove the battery: adım 4, 2 resimden 1. Replacing the Battery of the Fujitsu Primergy, Remove the battery: adım 4, 2 resimden 2.
    • Press on the clip (in red) and the battery should come out by itself

    • Insert the new battery

    • Check the polarity, usually the writings must be upwards

Sonuç

By replacing the CMOS battery the settings should remain saved

Bu çevirmenlere özel teşekkürler:

it en

100%

Bu çevirmenler dünyayı onarmamıza yardım ediyor! Katkıda bulunmak ister misiniz?
Çeviriye Başlayın ›

Ekli Belgeler

Marc developer

Üyelik tarihi: 08/16/21

1.348 İtibar

4 adet Kılavuz yazıldı

Ekip

iFanatics iFanatics üyesi

Community

54 Üyeler

156 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 19

Son 30 gün: 75

Her zaman: 616