Eşyalarını Tamir Et Topluluk Mağaza

ResMed VPAP Auto 25 Blower Unit Replacement Replacement

Giriş

The blower unit fails when the device becomes overused and outdated. It also fails as a result of dust clogging up the intake. Replacements extend for only a certain amount of time. Replacing the blower unit will save lots of money compared to buying a whole new unit. Eventually, a full unit replacement is necessary.

Neye ihtiyacın var

  1. ResMed VPAP Auto 25 Blower Unit Replacement Replacement, Blower Unit: adım 1, 3 resimden 1. ResMed VPAP Auto 25 Blower Unit Replacement Replacement, Blower Unit: adım 1, 3 resimden 2. ResMed VPAP Auto 25 Blower Unit Replacement Replacement, Blower Unit: adım 1, 3 resimden 3.

    • Remove the four 26.7 mm T3 Torx screws from the bottom side of the ResMed VPAP Auto 25.

    Düzenle

  2. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: adım 2, 3 resimden 1. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: adım 2, 3 resimden 2. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: adım 2, 3 resimden 3.

    • Flip the device over.

    • Pry the outermost plastic cover off with the metal spudger until the cover is loose and able to be removed.

    Düzenle

  4. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: adım 3, 2 resimden 1. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: adım 3, 2 resimden 2.

    • Pull off the front cover to reveal the internal components.

    Düzenle

  5. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: adım 4, 3 resimden 1. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: adım 4, 3 resimden 2. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: adım 4, 3 resimden 3.

    • Loosen the motherboard from the rubber dowels holding it in place and unplug the screen components.

    Düzenle

  6. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: adım 5, 3 resimden 1. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: adım 5, 3 resimden 2. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: adım 5, 3 resimden 3.

    • Remove the three 26.7 mm T3 Torx screws from the now visible rubber fan motor cover.

    • Lift off the rubber fan motor cover, revealing the fan motor.

    Düzenle

  7. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: adım 6, 1 resimden 1.

    • Unplug the blower unit cable.

    • Remove the fan motor blower unit.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Bir Yorum

where can we get a new motor?

ed allen - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 4

Her zaman: 296