Eşyalarını Tamir Et Topluluk Mağaza

Retro-Bit Retro Duo Controller Button and Pad Replacement.

Giriş

If your controller(s) have button malfunctions, they can be replaced.

Neye ihtiyacın var

  1. Retro-Bit Retro Duo Controller Button and Pad Replacement., Buttons and Pads in Controller(s): adım 1, 3 resimden 1. Retro-Bit Retro Duo Controller Button and Pad Replacement., Buttons and Pads in Controller(s): adım 1, 3 resimden 2. Retro-Bit Retro Duo Controller Button and Pad Replacement., Buttons and Pads in Controller(s): adım 1, 3 resimden 3.

    • With the controller on its face, remove the five 6 mm Phillips #1 screws.

    • After screw removal, carefully lift the controller casing.

    Düzenle

  2. Retro-Bit Retro Duo Controller Button and Pad Replacement.: adım 2, 3 resimden 1. Retro-Bit Retro Duo Controller Button and Pad Replacement.: adım 2, 3 resimden 2. Retro-Bit Retro Duo Controller Button and Pad Replacement.: adım 2, 3 resimden 3.

    • Pinch the top and bottom of the shoulder pads, then lift out.

    • There are small elastic pads below each shoulder pad. Replace these if they are not functioning correctly.

    Düzenle

  4. Retro-Bit Retro Duo Controller Button and Pad Replacement.: adım 3, 3 resimden 1. Retro-Bit Retro Duo Controller Button and Pad Replacement.: adım 3, 3 resimden 2. Retro-Bit Retro Duo Controller Button and Pad Replacement.: adım 3, 3 resimden 3.

    • Carefully lift the circuit board from the controller case.

    Düzenle

  5. Retro-Bit Retro Duo Controller Button and Pad Replacement.: adım 4, 3 resimden 1. Retro-Bit Retro Duo Controller Button and Pad Replacement.: adım 4, 3 resimden 2. Retro-Bit Retro Duo Controller Button and Pad Replacement.: adım 4, 3 resimden 3.

    • To replace the action button pad, lift this part out.

    • Lift the Select and Start button pad.

    • If replacing the D-Pad, lift this pad.

    • Pinch and lift the shoulder button pads.

    Düzenle

  6. Retro-Bit Retro Duo Controller Button and Pad Replacement.: adım 5, 3 resimden 1. Retro-Bit Retro Duo Controller Button and Pad Replacement.: adım 5, 3 resimden 2. Retro-Bit Retro Duo Controller Button and Pad Replacement.: adım 5, 3 resimden 3.

    • Support the controller face and push buttons toward the inner case.

    • Use care. The buttons have a tiny tab to keep them in place.

    • Support the controller face and push the D-Pad toward the inner case.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Evelyn

Üyelik tarihi: 09/25/17

223 İtibar

2 adet Kılavuz yazıldı

Rozetler: 4

+1 tane daha rozet

Ekip

USF Tampa, Team S4-G4, Eyestone Fall 2017 USF Tampa, Team S4-G4, Eyestone Fall 2017 üyesi

USFT-EYESTONE-F17S4G4

3 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 6

Her zaman: 1,169