Giriş

Clean the head of the hairdryer, including the vent, to prevent the fan from getting clogged. Debris in the fan may cause a rattling noise or cause the fan to stop working.

Before disassembly, make sure that the device is unplugged.
  • Before disassembly, make sure that the device is unplugged.

  • Unscrew the two 17.83 mm black screws located on the handle.

Yorum Ekle

Separate the shell from the main component.
  • Separate the shell from the main component.

  • Make sure that the each piece is free from debris.

Yorum Ekle

  • Continue to pull the components apart.

  • For reassembly, put the silver encasing on before the the black cover.

Yorum Ekle

  • Take the head of the hairdryer and pull the pieces apart.

Yorum Ekle

  • Remove the black vent from the grey cylindrical piece.

Yorum Ekle

  • If there is lint in the vent, use tweezers or a toothbrush to extract it from the vent.

  • This will keep the fan from getting clogged and malfunctioning.

Yorum Ekle

  • Clean the other black vent with a toothbrush.

Yorum Ekle

  • Clean these two components with a paper towel.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Jessica Leyva

Üyelik tarihi: 18-09-2012

80 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 1-5, Propen Fall 2012 Cal Poly, Team 1-5, Propen Fall 2012 üyesi

CPSU-PROPEN-F12S1G5

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 3

Son 30 Gün: 17

Her zaman: 973