Ana içeriğe geç

Giriş

This process involves removing the back cover and the front cover of the camera.

Parçalar

Hiçbir parça belirtilmedi.

  1. Unscrew the seven indicated screws from the left, right, bottom, and back sides of the camera. Unscrew the seven indicated screws from the left, right, bottom, and back sides of the camera.
    • Unscrew the seven indicated screws from the left, right, bottom, and back sides of the camera.

  2. Loosen the back cover from both the left and the right sides of the camera. Remove back cover. The lid of the battery compartment may fall off because it is not attached to anything. Remove back cover. The lid of the battery compartment may fall off because it is not attached to anything.
    • Loosen the back cover from both the left and the right sides of the camera.

    • Remove back cover. The lid of the battery compartment may fall off because it is not attached to anything.

  3. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  4. Open the film compartment. Press your finger on top of the grey latch on the left side of the camera. Press your finger on top of the grey latch on the left side of the camera.
    • Open the film compartment.

    • Press your finger on top of the grey latch on the left side of the camera.

  5. Removing the film compartment door is optional. However, it may aid maneuverability in future steps. Use a thin object like a toothpick or a small screwdriver to push down on the metal pin holding the film compartment door in place. Use your fingers to completely remove the metal pin.
    • Removing the film compartment door is optional. However, it may aid maneuverability in future steps.

    • Use a thin object like a toothpick or a small screwdriver to push down on the metal pin holding the film compartment door in place.

    • Use your fingers to completely remove the metal pin.

    • Remove the film compartment door.

  6. Using a thin shaft screwdriver, unscrew the two indicated screws within the film compartment. Using a thin shaft screwdriver, unscrew the two indicated screws within the film compartment.
    • Using a thin shaft screwdriver, unscrew the two indicated screws within the film compartment.

  7. Loosen the front cover from the left and right sides of the camera. Remove the front cover. Remove the front cover.
    • Loosen the front cover from the left and right sides of the camera.

    • Remove the front cover.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Eric Dazet

Üyelik tarihi: 10-04-2012

352 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 6-21, Amido Spring 2012 Cal Poly, Team 6-21, Amido Spring 2012 üyesi

CPSU-AMIDO-S12S6G21

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 246