Eşyalarını Tamir Et Topluluk Mağaza

Ridgid GEN5X R8611506 Speed Selector Switch Replacement

Giriş

Use this guide to remove or replace the speed selector switch for the brush-less drill, be sure to distinguish whether the problem stems from a jammed selector switch or one that is not latching to metal wire.

Neye ihtiyacın var

  1. Ridgid GEN5X R8611506 Speed Selector Switch Replacement, Outer Case: adım 1, 2 resimden 1. Ridgid GEN5X R8611506 Speed Selector Switch Replacement, Outer Case: adım 1, 2 resimden 2.

    • Orient the drill to have the side with the screws facing up.

    • Using the Torx T10 screwdriver, remove the eight 4.0mm screws from the face of the drill.

    Düzenle

  2. Ridgid GEN5X R8611506 Speed Selector Switch Replacement: adım 2, 3 resimden 1. Ridgid GEN5X R8611506 Speed Selector Switch Replacement: adım 2, 3 resimden 2. Ridgid GEN5X R8611506 Speed Selector Switch Replacement: adım 2, 3 resimden 3.

    • Orient the drill to where the back is facing up.

    • Using a Torx T10 screwdriver, remove the four 6.0mm screws that attach the back piece to the drill.

    • Remove the back piece of the drill using the iFixit opening tool.

    Düzenle

  4. Ridgid GEN5X R8611506 Speed Selector Switch Replacement: adım 3, 2 resimden 1. Ridgid GEN5X R8611506 Speed Selector Switch Replacement: adım 3, 2 resimden 2.

    • Orient the drill to where the chuck is facing up.

    • Using the Torx T15 screwdriver, remove the four 8.0mm screws from the front of the drill.

    Düzenle

  5. Ridgid GEN5X R8611506 Speed Selector Switch Replacement: adım 4, 2 resimden 1. Ridgid GEN5X R8611506 Speed Selector Switch Replacement: adım 4, 2 resimden 2.

    • Orient the drill so the side with the screw holes is facing up.

    • Use a plastic opening tool to gently pry the face off of the drill.

    • Remove the face completely from the drill.

    Düzenle

  6. Ridgid GEN5X R8611506 Speed Selector Switch Replacement, Speed Selector Switch: adım 5, 1 resimden 1.

    • Locate the selector switch.

    • Unhook the selector switch from the small silver wire located near the top of the drill.

    Düzenle

  7. Ridgid GEN5X R8611506 Speed Selector Switch Replacement: adım 6, 1 resimden 1.

    • Remove the speed selector switch from the case housing.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 3

Her zaman: 361