Ana içeriğe geç

Ridgid GEN5X R8611506 Trigger Replacement

Neye ihtiyacın var

  1. Ridgid GEN5X R8611506 Trigger Replacement, Outer Case: adım 1, 2 resimden 1. Ridgid GEN5X R8611506 Trigger Replacement, Outer Case: adım 1, 2 resimden 2.
    • Orient the drill to have the side with the screws facing up.

    • Using the Torx T10 screwdriver, remove the eight 4.0mm screws from the face of the drill.

  2. Ridgid GEN5X R8611506 Trigger Replacement: adım 2, 3 resimden 1. Ridgid GEN5X R8611506 Trigger Replacement: adım 2, 3 resimden 2. Ridgid GEN5X R8611506 Trigger Replacement: adım 2, 3 resimden 3.
    • Orient the drill to where the back is facing up.

    • Using a Torx T10 screwdriver, remove the four 6.0mm screws that attach the back piece to the drill.

    • Remove the back piece of the drill using the iFixit opening tool.

  3. Ridgid GEN5X R8611506 Trigger Replacement: adım 3, 2 resimden 1. Ridgid GEN5X R8611506 Trigger Replacement: adım 3, 2 resimden 2.
    • Orient the drill to where the chuck is facing up.

    • Using the Torx T15 screwdriver, remove the four 8.0mm screws from the front of the drill.

  4. Ridgid GEN5X R8611506 Trigger Replacement: adım 4, 2 resimden 1. Ridgid GEN5X R8611506 Trigger Replacement: adım 4, 2 resimden 2.
    • Orient the drill so the side with the screw holes is facing up.

    • Use a plastic opening tool to gently pry the face off of the drill.

    • Remove the face completely from the drill.

  5. Ridgid GEN5X R8611506 Trigger Replacement, Trigger: adım 5, 1 resimden 1.
    • Use a plastic opening tool to gently pry the trigger from the brown connector.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 14

Son 30 gün: 70

Her zaman: 481