Eşyalarını Tamir Et Topluluk Mağaza

Ridgid GEN5X R8642 Gear Assembly Replacement

Giriş

This guide is to help users replace the gear assembly for the Ridgid GEN5X R8642 saw. For this guide you will need: a spudger, a T20 Torx Screwdriver, a Phillips screwdriver size J1, replacement gear assembly for Ridgid GEN5X R8642, and a good attitude.


Neye ihtiyacın var

  1. Ridgid GEN5X R8642 Gear Assembly Replacement, Gear Assembly: adım 1, 1 resimden 1.

    • Remove the plastic tab holding the handle cover in place by prying upward with the spudger until the tab pops off.

    Düzenle

  2. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 2, 1 resimden 1.

    • Remove the handle cover by pulling it towards the front of the saw.

    • The grip can sometimes become stuck and may require a decent amount of force to remove.

    Düzenle

  3. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 3, 2 resimden 1. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 3, 2 resimden 2.

    • Use a T20 Torx screwdriver to remove the nine M4 X 16mm screws from the plastic housing.

    Düzenle

  4. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 4, 1 resimden 1.

    • Use a JIS #1 screwdriver to remove the two M4 x 25mm screws on both sides of the metal housing.

    Düzenle

  5. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 5, 1 resimden 1.

    • Remove one half of the plastic housing using a spudger so that the internal system is exposed.

    Düzenle

  7. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 6, 2 resimden 1. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 6, 2 resimden 2.

    • Remove the one 16mm T20 screw that holds the grip support onto the saw.

    Düzenle

  8. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 7, 3 resimden 1. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 7, 3 resimden 2. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 7, 3 resimden 3.

    • Remove the five T20 Torx screws from the gear assembly cover and pull the cover off.

    Düzenle

  9. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 8, 2 resimden 1. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 8, 2 resimden 2.

    • Carefully remove the motor making sure not to harm any of the wires that are attached. Place motor gently out of the way.

    Düzenle

  10. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 9, 3 resimden 1. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 9, 3 resimden 2. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 9, 3 resimden 3.

    • Remove the orbital switch by pulling straight up on it.

    • Be careful to not lose the spring and pin that is inside of the switch.

    Düzenle

  11. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 10, 3 resimden 1. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 10, 3 resimden 2. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 10, 3 resimden 3.

    • Remove the gear assembly by pulling it straight up.

    Düzenle

  12. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 11, 3 resimden 1. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 11, 3 resimden 2. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 11, 3 resimden 3.

    • Pull the pin holding the metal guide housing in place.

    • Slide the metal guide housing back off the gear assembly.

    Düzenle

  13. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 12, 2 resimden 1. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 12, 2 resimden 2.

    • Remove the guide bushing by pulling up on it.

    • Then slide the pin out that holds the gear assembly and blade clamp assembly.

    Düzenle

  14. Ridgid GEN5X R8642 Gear Assembly Replacement: adım 13, 1 resimden 1.

    • Slide the blade clamp assembly off the gear assembly.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Bir Yorum

When reassembling with new gear, does gear needs to be greased?

Syoma Zv - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 6

Son 30 gün: 29

Her zaman: 1,982