Ana içeriğe geç

Ridgid R2611 Switch Bracket Replacement

Neye ihtiyacın var

  1. Ridgid R2611 Switch Bracket Replacement, Switch Bracket: adım 1, 1 resimden 1.
    • Remove the seven 2.5 mm screws on the top of the sander using the Torx T15 screwdriver.

  2. Ridgid R2611 Switch Bracket Replacement: adım 2, 1 resimden 1.
    • Remove the top of the sander and put to the side.

  3. Ridgid R2611 Switch Bracket Replacement: adım 3, 1 resimden 1.
    • Use the screwdriver to unscrew the two #6-19 X 5/8 in screws holding down the outlet cord.

  4. Ridgid R2611 Switch Bracket Replacement: adım 4, 1 resimden 1.
    • Remove the cord from the handle.

  5. Ridgid R2611 Switch Bracket Replacement: adım 5, 1 resimden 1.
    • Remove the outer plastic piece holding down the white and black wires.

  6. Ridgid R2611 Switch Bracket Replacement: adım 6, 1 resimden 1.
    • Unplug the two connecting pieces that hold wires.

  7. Ridgid R2611 Switch Bracket Replacement: adım 7, 1 resimden 1.
    • Using the screwdrivers, unscrew the four #6-19 X 5/8 in screws on rectangular block.

  8. Ridgid R2611 Switch Bracket Replacement: adım 8, 1 resimden 1.
    • Remove the black and white wires by pulling out.

  9. Ridgid R2611 Switch Bracket Replacement: adım 9, 1 resimden 1.
    • Put the screwdriver in the holes to release remaining two wires.

  10. Ridgid R2611 Switch Bracket Replacement: adım 10, 1 resimden 1.
    • Remove the two remaining wires from switch, leaving the switch freed.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Ana

Üyelik tarihi: 01/16/19

384 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 7

Her zaman: 273