Ring Outdoor Security Cam Microphone Replacement

Giriş

This guide demonstrates how to replace a Ring Outdoor Security Cam microphone. Like many microphones, a common issue with the Ring Camera's microphone is it can become damaged, resulting in poor audio quality over time. This fix has no safety hazards, and the difficulty level is difficult due to sodering. The main procedure is to open up the camera and take off layer by layer until getting to the microphone. From there you will detach the microphone from the board and solder on the new microphone.

Neye ihtiyacın var

Adım 1 Microphone

Ring Outdoor Security Cam Microphone Replacement, Microphone: adım 1, 1 resimden 1.

Remove the six 6 mm Phillips #00 screws from the back on the device.

Düzenle

Adım 2

Pry off the aluminum plate using a plastic opening tool.

Düzenle

Adım 3

Use an opening tool to pry the back plate off of the device.

Düzenle

Adım 4

Disconnect the battery power leads using a plastic opening tool.

Düzenle

Adım 5

Use a plastic opening tool to loosen the adhesive holding the battery in place and remove the battery by hand.

Düzenle

Adım 6

Disconnect the ribbon cable carefully at the bottom of the device.
Remove the 3 silver 6 mm Phillips #00 screws from the motherboard.

Düzenle

Adım 7

Pull the top of the motherboard up and out of the device.

Düzenle

Adım 8

Remove the silver 5 mm Phillips #00 screw, and the two 10 mm Phillips #00 from the next motherboard.
Remove the 3 plastic spacers on the device.

Düzenle

Adım 9

Ring Outdoor Security Cam Microphone Replacement: adım 9, 3 resimden 3.

Pry the motherboard out with a plastic opening tool
Flip the device over and then carefully press on the camera lens to remove the camera and the attached mother board from the device.

Düzenle