Eşyalarını Tamir Et Topluluk Mağaza

Ring Outdoor Security Cam Speakers Replacement

Giriş

This guide is for the purpose of demonstrating how to replace a Ring Outdoor Security Cam speaker. Like many cameras, a common issue with Ring's outdoor cam is the speaker's which overtime can become damaged resulting in warped or no audio. There are no safety hazards for this fix, and the difficulty level is moderate. It's an easy, fast fix with no specific experience or knowledge aside from screws.

Neye ihtiyacın var

  1. Ring Outdoor Security Cam Speakers Replacement, Speakers: adım 1, 1 resimden 1.

    • Remove the six 6 mm Phillips #00 screws from the back on the device.

    Düzenle

  2. Ring Outdoor Security Cam Speakers Replacement: adım 2, 1 resimden 1.

    • Pry off the aluminum plate using a plastic opening tool.

    Düzenle

  3. Ring Outdoor Security Cam Speakers Replacement: adım 3, 1 resimden 1.

    • Use an opening tool to pry the back plate off of the device.

    Düzenle

  4. Ring Outdoor Security Cam Speakers Replacement: adım 4, 1 resimden 1.

    • Disconnect the battery power leads using a plastic opening tool.

    Düzenle

  6. Ring Outdoor Security Cam Speakers Replacement: adım 5, 1 resimden 1.

    • Use a plastic opening tool to loosen the adhesive holding the battery in place and remove the battery by hand.

    Düzenle

  7. Ring Outdoor Security Cam Speakers Replacement: adım 6, 1 resimden 1.

    • Disconnect the ribbon cable carefully at the bottom of the device.

    • Remove the 3 silver 6 mm Phillips #00 screws from the motherboard.

    Düzenle

  8. Ring Outdoor Security Cam Speakers Replacement: adım 7, 1 resimden 1.

    • Pull the top of the motherboard up and out of the device.

    Düzenle

  9. Ring Outdoor Security Cam Speakers Replacement: adım 8, 2 resimden 1. Ring Outdoor Security Cam Speakers Replacement: adım 8, 2 resimden 2.

    • Remove the silver 5vmm Phillips #00 screw, and the two 10mm Phillips #00 from the next circuit board.

    • Remove the 3 plastic spacers on the device.

    Düzenle

  10. Ring Outdoor Security Cam Speakers Replacement: adım 9, 3 resimden 1. Ring Outdoor Security Cam Speakers Replacement: adım 9, 3 resimden 2. Ring Outdoor Security Cam Speakers Replacement: adım 9, 3 resimden 3.

    • Pry the motherboard out with a plastic opening tool.

    • Flip the device over and then carefully press on the camera lens to remove the camera and the attached mother board from the device.

    Düzenle

  11. Ring Outdoor Security Cam Speakers Replacement: adım 10, 2 resimden 1. Ring Outdoor Security Cam Speakers Replacement: adım 10, 2 resimden 2.

    • Remove the six silver 4.5 mm Phillips #00 screws holding the daughterboard into the device.

    • Then use the plastic prying tool to remove the final daughterboard and attached microphone

    Düzenle

  12. Ring Outdoor Security Cam Speakers Replacement: adım 11, 1 resimden 1.

    • Using the plastic prying tool pop out the speakers on the back of the daughterboard.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

WilliamB22

Üyelik tarihi: 09/13/23

941 İtibar

5 adet Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

University of North Texas, Team 6-2, Kilpatrick Fall 2023 University of North Texas, Team 6-2, Kilpatrick Fall 2023 üyesi

UNT-KILPATRICK-F23S6G2

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 104