Ana içeriğe geç

Giriş

If you are having trouble with the motion-activated lights and you would like to replace them, follow the 4 steps that are provided. It will take approximately 15-35 minutes.

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the top plastic pad by peeling it off with a metal spudger.
    • Remove the top plastic pad by peeling it off with a metal spudger.

  2. Remove the 7 PH00 screws around the four corners with PH00 of the lid. Remove the 7 PH00 screws around the four corners with PH00 of the lid.
    • Remove the 7 PH00 screws around the four corners with PH00 of the lid.

  3. Apple Watch Kitleri

    Screen and battery repairs just got easier.

    Hemen Alışveriş Yapın

    Apple Watch Kitleri

    Screen and battery repairs just got easier.

    Hemen Alışveriş Yapın
  4. Use the metal spudger set to break the glue lining and the motion sensor will pop out.
    • Use the metal spudger set to break the glue lining and the motion sensor will pop out.

  5. Replace the motion sensors.
    • Replace the motion sensors.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 5

Son 30 Gün: 19

Her zaman: 98