Eşyalarını Tamir Et Topluluk Mağaza

Ring Spotlight Cam Battery Motion Detector Replacement

Giriş

A step-by-step guide to remove and replace the motion detector in a Ring Spotlight Battery-Powered Cam.

Neye ihtiyacın var

  1. Ring Spotlight Cam Battery Motion Detector Replacement, Motion Detector: adım 1, 1 resimden 1.

    • Rotate the camera so the mounting bracket is facing you.

    • Turn the camera so the mounting bracket is at the bottom.

    Düzenle

  2. Ring Spotlight Cam Battery Motion Detector Replacement: adım 2, 1 resimden 1.

    • Press the top button and slide your thumb upward to open the camera.

    Düzenle

  3. Ring Spotlight Cam Battery Motion Detector Replacement: adım 3, 1 resimden 1.

    • Remove the batteries in the camera before proceeding.

    • Remove the two screws located in the middle of the cover with a Phillips #1 screwdriver.

    Düzenle

  5. Ring Spotlight Cam Battery Motion Detector Replacement: adım 4, 1 resimden 1.

    • Remove the middle component.

    Düzenle

  6. Ring Spotlight Cam Battery Motion Detector Replacement: adım 5, 1 resimden 1.

    • Remove the sticker on the cover.

    • Remove the 10 screws located around the edge of the cover.

    Düzenle

  7. Ring Spotlight Cam Battery Motion Detector Replacement: adım 6, 1 resimden 1.

    • Carefully close the cover.

    Düzenle

  8. Ring Spotlight Cam Battery Motion Detector Replacement: adım 7, 1 resimden 1.

    • Remove the cover and replace the LED light.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 8

Son 30 gün: 37

Her zaman: 2,172