Eşyalarını Tamir Et Topluluk Mağaza

Roconia Q6 Top Cover Replacement

Giriş

This guide will show you how to open your Roconia device to access its internal components.

Neye ihtiyacın var

  1. Roconia Q6 Top Cover Replacement, Top Cover: adım 1, 2 resimden 1. Roconia Q6 Top Cover Replacement, Top Cover: adım 1, 2 resimden 2.

    • Flip your device upside down so that the interface is facing downwards.

    Düzenle

  2. Roconia Q6 Top Cover Replacement: adım 2, 3 resimden 1. Roconia Q6 Top Cover Replacement: adım 2, 3 resimden 2. Roconia Q6 Top Cover Replacement: adım 2, 3 resimden 3.

    • The device is supported by rubber pieces located at the bottom extremities.

    • There are screws beneath the rubber pieces that can be removed. Remove all four 1.1 mm Phillips #1 screws by using the Phillips #0 screwdriver.

    Düzenle

  4. Roconia Q6 Top Cover Replacement: adım 3, 3 resimden 1. Roconia Q6 Top Cover Replacement: adım 3, 3 resimden 2. Roconia Q6 Top Cover Replacement: adım 3, 3 resimden 3.

    • Turn device over again and pry open the device to remove the cover.

    Düzenle

  5. Roconia Q6 Top Cover Replacement: adım 4, 3 resimden 1. Roconia Q6 Top Cover Replacement: adım 4, 3 resimden 2. Roconia Q6 Top Cover Replacement: adım 4, 3 resimden 3.

    • Pull out the cable that is connected to the top cover to fully separate.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Elizabeth

Üyelik tarihi: 02/08/24

217 İtibar

2 adet Kılavuz yazıldı

Rozetler: 4

+1 tane daha rozet

Ekip

University of North Texas, Team 4-4, Harold Spring 2024 University of North Texas, Team 4-4, Harold Spring 2024 üyesi

UNT-HAROLD-S24S4G4

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 7

Her zaman: 61