Eşyalarını Tamir Et Topluluk Mağaza

Roller Skate Double Action Cushion Replacement

Giriş

Need to replace those rubber cushions and washers on the trucks of your classic roller skates? No problem. The only tool required is a 14 mm wrench or ratchet and socket. Replacement cushions and washers are available online or at any respectable skate shop.

Neye ihtiyacın var

  1. Roller Skate Double Action Cushion Replacement, Sure-Grip Double Action Cushion: adım 1, 1 resimden 1.

    • Using a 14 mm wrench, loosen and extract the bolt from the base plate.

    Düzenle

  2. Roller Skate Double Action Cushion Replacement: adım 2, 1 resimden 1.

    • Once the bolt is no longer in the base plate, lift and twist the entire truck assembly from the skate.

    Düzenle

  4. Roller Skate Double Action Cushion Replacement: adım 3, 2 resimden 1. Roller Skate Double Action Cushion Replacement: adım 3, 2 resimden 2.

    • Flip the truck over and remove the nut from the truck assembly bolt.

    Düzenle

  5. Roller Skate Double Action Cushion Replacement: adım 4, 2 resimden 1. Roller Skate Double Action Cushion Replacement: adım 4, 2 resimden 2.

    • Remove both sets of cushions and retaining washers from the bolt.

    Düzenle

  6. Roller Skate Double Action Cushion Replacement: adım 5, 3 resimden 1. Roller Skate Double Action Cushion Replacement: adım 5, 3 resimden 2. Roller Skate Double Action Cushion Replacement: adım 5, 3 resimden 3.

    • Remove the retaining washer from each cushion.

    • Use a spudger if the washer and cushion are difficult to separate.

    • Replace worn cushions and washers.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Jen Rushing

Üyelik tarihi: 05/24/15

1 İtibar

1 Kılavuz yazıldı

Rozetler: 3

Ekip

CCNTH Repair Project CCNTH Repair Project üyesi

Community

2 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 14

Her zaman: 2,090