Eşyalarını Tamir Et Topluluk Mağaza

Rosewill NEON M62 Bottom Panel Replacement

Giriş

This guide explains how to completely teardown the Rosewill NEON M62 mouse. This repair should be performed when something needs to be replaced internally.

Neye ihtiyacın var

  1. Rosewill NEON M62 Bottom Panel Replacement, Bottom Panel: adım 1, 1 resimden 1.

    • Place the mouse so the bottom is facing upwards.

    • Remove the plastic skates.

    • These are not shown in the picture since they were missing from the device.

    • Remove the two 5 mm screws with a Phillips #00 screwdriver.

    Düzenle

  3. Rosewill NEON M62 Bottom Panel Replacement: adım 2, 1 resimden 1.

    • Use the opening tool along the side of the mouse to open up it.

    • This may take multiple attempts to do so; be patient and careful not to break the mouse.

    Düzenle

  4. Rosewill NEON M62 Bottom Panel Replacement: adım 3, 2 resimden 1. Rosewill NEON M62 Bottom Panel Replacement: adım 3, 2 resimden 2.

    • Loosen the top and bottom half of the mouse with the opening tool, and slowly pull up the bottom half of the mouse.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Joshua Alves

Üyelik tarihi: 03/16/23

97 İtibar

1 Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

UMass Dartmouth, Team 7-2, Ryckebusch Spring 2023 UMass Dartmouth, Team 7-2, Ryckebusch Spring 2023 üyesi

UMASSD-RYCKEBUSCH-S23S7G2

3 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 4

Her zaman: 103