Ana içeriğe geç

Ryobi P516 Top Case Replacement

Neye ihtiyacın var

  1. Ryobi P516 Top Case Replacement, Top Case: adım 1, 2 resimden 1. Ryobi P516 Top Case Replacement, Top Case: adım 1, 2 resimden 2.
    • Using the 5mm hex key included at the base of the saw, loosen the set screw at the front of the saw.

    • The front guard will now slide out from the front of the saw.

  2. Ryobi P516 Top Case Replacement: adım 2, 3 resimden 1. Ryobi P516 Top Case Replacement: adım 2, 3 resimden 2. Ryobi P516 Top Case Replacement: adım 2, 3 resimden 3.
    • Remove the two 10mm T20 Torx screws from the front of the saw.

    • Pull out the front plate.

  3. Ryobi P516 Top Case Replacement: adım 3, 3 resimden 1. Ryobi P516 Top Case Replacement: adım 3, 3 resimden 2. Ryobi P516 Top Case Replacement: adım 3, 3 resimden 3.
    • Start at the middle of the device and begin to pry up the rubber grip.

    • Pull the rubber portion inside out towards the front of the saw.

  4. Ryobi P516 Top Case Replacement: adım 4, 1 resimden 1.
    • Remove all twelve 14mm T20 Torx screws from the main case of the device.

  5. Ryobi P516 Top Case Replacement: adım 5, 3 resimden 1. Ryobi P516 Top Case Replacement: adım 5, 3 resimden 2. Ryobi P516 Top Case Replacement: adım 5, 3 resimden 3.
    • Remove the four 35mm Phillips #2 screws.

    • Pry the two case halves apart starting at the middle of the saw.

    • Watch out for any loose parts from inside the saw that may fall out during this step.

  6. Ryobi P516 Top Case Replacement: adım 6, 1 resimden 1.
    • Continue splitting the case until the top piece of the case is free and set it aside.

Sonuç

To reassemble your device, follow these instructions in reverse order.

6 farklı kişi bu kılavuzu tamamladı.

2 Yorum

P516 blade locking parts

Bill clark - Yanıt

P516 blade locking parts breakdown, please ?

Bill clark - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 16

Son 30 gün: 78

Her zaman: 4,210