Eşyalarını Tamir Et Topluluk Mağaza

Ryobi RJ1861V Motor Housing Replacement

Neye ihtiyacın var

  1. Ryobi RJ1861V Motor Housing Replacement, Trigger Assembly: adım 1, 1 resimden 1.

    • Use a Torx T20 screwdriver to remove the nine 16.5 mm screws around the trigger assembly.

    Düzenle

  2. Ryobi RJ1861V Motor Housing Replacement: adım 2, 2 resimden 1. Ryobi RJ1861V Motor Housing Replacement: adım 2, 2 resimden 2.

    • Use a Torx T20 screwdriver to remove the two 16.5 mm screws near the trigger.

    Düzenle

  4. Ryobi RJ1861V Motor Housing Replacement, Motor Housing: adım 3, 1 resimden 1.

    • Use a Torx T20 bit or screwdriver to remove the six 19 mm screws securing the gear case cover.

    Düzenle

  5. Ryobi RJ1861V Motor Housing Replacement: adım 4, 2 resimden 1. Ryobi RJ1861V Motor Housing Replacement: adım 4, 2 resimden 2.

    • Use a Phillips #2 bit or screwdriver to remove the four 37 mm screws from the top and the bottom of the gear case.

    • Once these 4 screws are removed, you have access to the motor assembly.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 7

Her zaman: 144